Dairy Complex – Hedley

4 Sheds, 1 Farm

In January 2019, this dairy farm was bare paddocks. Located in Hedley, Victoria, this site is now a modern dairy complex.

The sheds were designed and manufactured in stages.

Stage one included the rotary dairy shed and the stockyard cover. Quoting and permits commenced in May 2018. Installation of these sheds was completed by March 2019.

The calving barn and the calf rearing shed were stage two of the project. The quote and permit processes started in October 2020 and installation of both sheds was completed by June 2021.

Dairy Shed:

  • 40.6m long (5x 8m bays) x 30m wide x 5.2m eave height
  • 7.5° gable
  • Hot dip galvanized universal beam columns and rafters
  • 3.9h x 3.75w roll up door
  • 3 – 4.8h sliding doors ranging from 7m wide to 2.5m wide
  • Pale Eucalypt® roof and wall cladding
  • 3050 GSM fibreglass skylights
  • Gable infill

Stockyard Cover:

  • 40.5m long (5x 7.5m bays) x 15m wide x 4m eave height
  • 3° skillion
  • Hot dip galvanized circular hollow section columns in stock areas to help prevent bruising
  • Hot dip galvanized universal beam rafters and back wall columns
  • Attached to rotary dairy shed
  • 2 – 3.2h x 7.5w sliding doors
  • Roof overhangs for weather protection
  • Pale Eucalypt® roof and wall cladding

Calving Barn:

  • 63.6m long (7x 9m bays) x 33m wide (30m shed + 1.5m overhangs both sides) x 5.2m post height
  • 7.5° gable
  • Wall girts to suit marine ply installed by client
  • Hot dip galvanized universal beam column and rafters
  • Ridge and eave ventilation gaps for airflow
  • Eave overhangs each side for weather protection
  • Custom gutters and rainheads to reduce downpipe quanities
  • Pale Eucalypt® roof and wall cladding

Calf Shed:

  • 112.5m long (14x 8m bays) x 12m wide (10m shed + 1.5m & 0.5m overhangs) x 4.5m eave height at low side
  • 5° Skillion
  • Universal beam columns and rafters hot dip galvanzised
  • Wall girts to suit marine ply installed by client
  • Custom gutter to reduce number of downpipes required
  • Eave vent gap allowing for airflow
  • Facing north to optimize sunlight during winter
  • Eave overhangs to weather protection
  • Pale Eucalypt® roof and wall cladding
Request a Quote